At present, the high-pressure cleaner is an indispensable member of the cleaning industry, and it is getting more and more attention from everyone. It is not difficult to find that it can be seen in chemical plants, shopping malls, and ships.

However, the high-pressure cleaner is also a mechanical device. If it is not properly maintained after a long period of use, some faults will occur. In order to avoid the failure of the high-pressure cleaner to affect normal use, what are the common problems and causes of the high-pressure cleaner today?
First, the spray gun does not spray water may cause:
1. The water inlet and inlet water filter are blocked.
2. The nozzle is clogged.
3. The heating spiral tube is clogged and the scale is removed if necessary.
Second, the water pressure is unstable
1. Insufficient water supply.
2. The pipe is broken and the cleaner nozzle is not inserted into the cleaning agent.
3. The nozzle is worn.
4. The high pressure water pump seal leaks.
Third, the burner does not ignite and burn
1. Insufficient air intake, white smoke.
2. The fuel filter, fuel pump and fuel nozzle are dirty and clogged.
3, solenoid valve damage
4. The position of the ignition electrode changes and the spark is too weak.
5. The high voltage ignition coil is damaged.
6, the pressure switch damage.
The above problems occur in the high temperature and high pressure cleaner, and the user can find the cause and eliminate the fault. However, if there is a serious fault such as water leakage in the pump body or oil leakage in the crankcase, the cleaning machine should be sent to a professional maintenance department with complete accessories and strong technical strength to avoid unnecessary economic losses.